Call us for a FREE Estimate. Dial NOW (250) 248-7927

Mon - Fri : 8:00 am to 4:30 pm

Door Features – Aluminum SA6500

SA6500 Features

*New Design*

Hydr-O-Guard

Re-designed to keep the weather out.
Note: SA6500 Aluminum rails will be used going forward on all Aluminum door styles.

Frames

  • Thickness: 1.8mm (0.071”) to 2.5mm (0.100”); 3.2mm (1/8”) or more at fastener locations.
  • Intermediate Stiles: located on interior face only. 1.6mm (0.063”) minimum and 4.8mm (0.189”) at fastener locations. Stile width 76mm (3.0”).
  • Top Rail: aluminum strut 38mm (1-1/2”) deep.

Insulated Aluminum Panel

1.27 mm thick aluminum sheet material insulated and sealed to door frame.

Door Face Hardware

  • Graduated end hinges and centre hinges made from galvanized steel.
  • Heavy duty rollers with heat-treated and outer races with 10 floating ball bearings.

Tracks

50 mm or 75 mm wide galvanized steel tracks.

Weatherstripping

  • Bottom weatherstripping: U-type arctic grade vinyl.
  • Jamb: quality factory finished metal with two-point flexible arctic grade vinyl weatherstrip.
  • Header: quality factory finished metal with two-point flexible arctic grade vinyl weatherstrip.
  • Section Interface: arctic grade vinyl bubble shaped weatherstrip at all section meeting rails in integral retainer.

Counterbalance System

  • Class II oil tempered ASTM A229 wire, minimum 10,000 cycle torsion springs on continuous steel shaft.
  • Aircraft quality galvanized lift cables with a minimum safety factor of 5 to 1.

Locking

Interior mounted slide bolt suitable for pad locking.

Operation

Manual, Optional Hand chain hoist (3-1 ratio) or optional electric operator.