The Commercial Flush garage door series conveys a progressively modern aesthetic while maintaining exceptional construction and thermal efficiency making it versatile in any commercial or agricultural application.
Commercial Flush Door Size Chart
2″ Track
Number of Panels
Standard Height-2" Track
3″ Track
Standard Height-3" Track
Door Features
- Flexible top seal keeps cold and debris out.
- Section weather seals keep wind and cold out.
- PVC retainer aids in door rigidity.
- Top-quality Canadian galvanized steel is durable and rust resistant.
- Two-coat exterior polyester paint finish on inner and outer skin is extremely durable.
- Mechanically interlocked front and back skins increase strength.
- Continuous steel overlap secures hardware attachments.
- Flexible floor seal conforms to minor irregularities to keep out cold and debris.
- Insulated windows feature sealed lites and high-impact polymer frames.
- Heavy-duty rollers and hardware are durable and make for easy installation.
About Our Colours
Every door is finished with a factory applied, baked on, two coat polyester paint finish giving years of maintenance free operation.
Doors may be painted to suit the exterior colour specifications.
Note: The accuracy of the colours displayed may vary depending on the settings of your monitor. To obtain an exact colour reference, please contact us for colour samples.
White Stucco
Aluminum Stucco
Sable Grey Stucco
Vision Lite - Sealed Unit
Frame Colour - Black Only
Black
Sealed Glass
Available in Single Pane, Thermo Sealed Units, and Triple Pane.
Tri-Seal upgrade available on sealed units.
Clear
Satin Texture
Note: Consult with us on the wide variety of glass options and special orders.
Aluminum Full View Section
Note: SA7500 rails must be used in Aluminum Full View Sections.
Aluminum Fill View Section Frames
Anodized
Acrynar Finish
Powdercoat Options
Clear (Aluminum)
White
Sable Grey
Brown
Sealed Glass
Available in Single Pane, Thermo Sealed Units, and Triple Pane.
Tri-Seal upgrade available on sealed units.
Clear
Satin Texture
Thermoclear Polycarbonate
Double Wall 6mm
Triple Wall 16mm
Triple Wall 16mm
Triple Wall 16mm
Triple Wall 16mm
Triple Wall 16mm
Triple Wall 16mm
Triple Wall 16mm
Note: The glazing material (Thermoclear®) used is ideal for humid environments, however it differs from glass in that it’s not sealed, therefore condensation may form in the cellular walls when interior/exterior temperatures are such that dew point temperatures are created (usually in periods of cooler weather). This condensation usually disappears when warmer weather returns.
Door Face
- Single end
- Double end 17’w+
- 14ga single end
- 11ga single end
- 14ga double end 17’w+
- 11ga double end 1000lbs
- 14ga intermediate
- 2” 10 ball short stem
- 3” 10 ball short stem
- 2” 10 ball long stem
- 3” 10 ball long stem
- 2” nylon sealed bearing
- 3” UHMW sealed bearing
- 3” rubber sealed bearing
- 3” nylon stainless shaft
- Standard duty single
- Standard duty double 17’w+
- Heavy duty double 1300lbs
- Standard duty
- Heavy duty 1300lbs
- Heavy duty fail safe
- Sidelock
- Interior barlock
- Exterior keyed barlock
- Tub handle
- PVC hand grip
- Handle step plate
- 3”
- 4”
- 5”
- DASMA PVCP Standard
- Available to increase windload capacities
Weatherstrip
- 3” U-type
- 4” U-type
- 2” top flap
- 3” top flap – 17’w+
- Steel/vinyl
- PVC/vinyl
- Bottom PVC V
- Bottom Aluminum L
- TOP PVC V
Guides
- Standard lift
- High lift
- Vertical lift
- Low lift double track
- (All available to allow following the roof slope if needed).
- Horizontal reinforcing engineered for specific size requirements.
- Bracket mount
- Angle mount continuous 13ga
- Angle mount reverse 13ga
Torsion
- Standard 10,000 cycle
- Optional increased cycle
- (Engineered for specific requirements)
- 14ga galvanized tube 1”
- Cold roll solid shaft 1”
- Cold roll solid shaft 1-1/4”
- Standard flange bearing 1”
- Heavy duty flange bearing 1”
- 2 bolt cast flange bearing 1”
- Centre plate flange bearing 1-1/4”
- End plate flange bearing 1-1/4”
- 2 bolt cast flange bearing 1-1/4”
- (Engineered for specific weight requirements)